Master-bus editor
Apply the 10-stage studio mastering bus to any sound-bank upload. Pick a preset for sensible defaults, then tune individual stages.
The 10 stages
- Hi-pass — linear-phase, default 30 Hz. Removes rumble.
- Transformer EQ — Neve-style with 4 bands + drive (~0.15). Adds 3rd-harmonic warmth on each band.
- SSL G-bus compressor — 2.5-4:1 ratio, 30/300 ms attack/release, ~3 dB gain reduction on transients. “Glue” for the bus.
- Multiband compression — 3 bands (200 Hz / 2 kHz crossover), per-band thresholds. Tames individual ranges without touching the rest.
- Harmonic enrichment — per-band saturation (LF: tape, MF: transformer, HF: gentle tube). Optional but on by default.
- Stereo width — mid-side widening (~1.5 dB side gain) + Haas delay (~4 ms).
- Reverb send — plate or spring (or none), 2-4s decay, 15-30% wet. Plate = smooth shimmer; spring = bounce + boing.
- BBD chorus — analog-style chorus, optional.
- LUFS normalise — to target_lufs (default -20).
- True-peak limiter — 8x-oversampled, -1 dBTP ceiling, 5 ms lookahead, with TPDF dither at 16-bit.
The 5 presets
- studio-pad-ambient — warm pads. Transformer EQ at 80/240/3k/10k, moderate SSL glue, 3s plate, BBD chorus on.
- studio-drone-deep — bass drones. Deep EQ (60/200/5k), stronger SSL, 4s spring, heavy LF saturation.
- studio-bell — bells / gongs. Gentle EQ, NO SSL or multiband (preserves transients), long plate (4-5s), NO chorus.
- studio-modular — modular synth. Balanced EQ, SSL + multiband, spring reverb, chorus on.
- studio-binaural-pure — binaural beats. MINIMAL: hi-pass + LUFS
- limiter only. No EQ, no compression, no reverb. Preserves the exact math the beat depends on.
Critical: when to use studio-binaural-pure
For any track where the audio’s psychoacoustic effect depends on exact frequencies (binaural beats, solfeggio tones, isochronic pulses), apply the binaural-pure preset. Any compression / saturation / reverb breaks the math.
Symptoms of having applied the wrong preset to a binaural track:
- Beat depth feels weaker
- The “phantom carrier” in the centre of your head wobbles
- Gemini judge scores intent_fidelity below 8
Parameters to tune most often
- target_lufs (-20) — match the catalog
- ssl.threshold_db — controls how much glue
- reverb.kind / decay_sec / wet — sets the atmosphere
- width.side_gain_db — but don’t go above 3 dB (mono fold-down breaks)
Runtime + cost
~5s per render. Free (CPU-bound).